OCZ Vector Barefoot 3 Solid State Drive Review


Test Setup, IOMeter 1.1 RC

Our Test Methodologies: Under each test condition, the Solid State Drives tested here were installed as secondary volumes in our testbed, with a standard spinning hard disk for the OS and benchmark installations. Out testbed's motherboard was updated with the latest BIOS available as of press time and AHCI (or RAID) mode was enabled. The SSDs were secure erased and left blank without partitions wherever possible, unless a test required them to be partitioned and formatted, as was the case with our ATTO, PCMark 7, and CrystalDiskMark benchmark tests. Windows firewall, automatic updates and screen savers were all disabled before testing. In all test runs, we rebooted the system, ensured all temp and prefetch data was purged, and waited several minutes for drive activity to settle and for the system to reach an idle state before invoking a test.

HotHardware Test System
Intel Core i7 and SSD Powered

Processor -

Motherboard -


Video Card -

Memory -

Audio -

Hard Drives -

 

Hardware Used:
Intel Core i7-2600K

Asus P8Z6-V Pro
(Z68 Chipset, AHCI Enabled)

NVIDIA GeForce GTX 285

4GB Kingston DDR3-1600

Integrated on board

WD Raptor 150GB (OS Drive)
Samsung SSD 830 (256GB)
OCZ Vertex 3 (200GB)
Corsair Force GT (240GB)
Crucial M4 (256GB)
OCZ Vector (256GB)
Intel SSD 520 (240GB)
OCZ Vertex 4 (256GB)

OS -
Chipset Drivers -
DirectX -

Video Drivers
-


Relevant Software:
Windows 7 Ultimate SP1 x64
Intel 9.2.0.1030, iRST 10.5.1027
DirectX 11

NVIDIA GeForce 275.33

Benchmarks Used:
IOMeter 1.1.0 RC
HD Tune v4.61
ATTO v2.47
AS SSD
CrystalDiskMark v3.01 x64
PCMark 7
SiSoftware Sandra 2011

IOMeter
I/O Subsystem Measurement Tool

As we've noted in previous SSD articles, though IOMeter is clearly a well-respected industry standard drive benchmark, we're not completely comfortable with it for testing SSDs. The fact of the matter is, though our actual results with IOMeter appear to scale properly, it is debatable whether or not certain access patterns, as they are presented to and measured on an SSD, actually provide a valid example of real-world performance for the average end user. That said, we do think IOMeter is a reliable gauge for relative available throughput within a given storage solution. In addition there are certain higher-end workloads you can place on a drive with IOMeter, that you an't with most other storage benchmark tools available currently.

In the following tables, we're showing two sets of access patterns; our custom Workstation pattern, with an 8K transfer size, 80% reads (20% writes) and 80% random (20% sequential) access and IOMeter's default access pattern of 2K transfers, 67% reads (34% writes) and 100% random access.

The new OCZ Vector bested the competition with the IOMeter access patterns we used. With both the default and our custom workstation access patterns, the Vector put up the best scores, almost across the board. But where it didn’t top all others, it was still right in the mix.

The same rung true in terms of transfer speeds in IOMeter as well. The Vector offered up the best performance with IOMeter’s default pattern, but just missed the top spot with our custom workstation access pattern.
 


Related content